NETGEAR WNR612

Netgear WNR612 Wireless Router User Manual
65
In this page, you can export the configuration information of the router in a file to
the computer for later use, import a previously saved or a new configuration file,
restore the factory default settings of the router, and reboot the router.
Backup
Click Backup and select the path to save the configuration of the router as a
local file.
Restore
Click Browse… to select the configuration file in your computer and click
Restore to load the selected file to the router.
Erase
Click Erase to restore the factory default settings of the router. This
operation has the same effect of pressing the Reset button on the rear panel
for 3 seconds.
Reboot
Click Reboot to reboot the router.
Caution:
After a new configuration file is imported, the original configuration
information of the router is lost. Hence, it is recommended to back up the
configuration before importing a new configuration file. If the new
configuration file is incorrect, you can import the previous backup file.
During a configuration file is loading, do not power off the router.
Otherwise, the router may be damaged and fail to work.
6.6.4 Set Password
Click Set Password on the left pane of the page to display the following page.