NETGEAR WNR612

Netgear WNR612 Wireless Router User Manual
85
After setting, click Add to add an entry to the Address Reservation Table.
 Note:
If your IP address is changed, you must use the new IP address to
log in to the Web configuration page of the router and the default
gateway of all hosts in the LAN must be set to the new IP address
for Internet access.
The subnet mask of all hosts in the LAN must be consistent with the
subnet mask specified in the LAN IP Setup page.
6.7.6 QoS Setup
Click QoS Setup on the left pane of the page to display the following page.
The QoS function sets priority policies on applications, online games, Ethernet LAN
ports, and MAC addresses, sets an order for various network traffics, and thus
optimizes your network performance.
The following table describes parameters in the QoS Setup page:
Field Description
Enable WMM
(Wi-Fi
Enable or disable WMM. Wireless Multimedia (WMM) is a
subset of the 802.11e standard. It supports setting priorities of