NETGEAR WNR612

Netgear WNR612 Wireless Router User Manual
86
Field Description
multi-media)
Settings
wireless traffics according to data types within a certain range.
Time-related information such as audio and video has higher
priority than normal data. To ensure proper performance of
WMM, wireless clients must support WMM.
Turn Internet
QoS Access On
Enable or disable QoS. After it is enabled, you can optimize the
network access traffics according to the settings in the QoS
Priority Table page.
Turn Bandwidth
Control On
Set the maximum uplink bandwidth at the WAN port.
If the value is in units of Kbps, the maximum value is 1000. If
the value is in units of Mbps, the maximum value is 100.
Setup QoS rule Click the button and the QoS Setup page is displayed
Enable Trusted
IP Address
After it is enabled, you can reserve half egress bandwidth for a
specified computer, to avoid impact to the computer because of
Internet access behaviors by other users in the network.
Trusted IP
Address
Specify the IP address of a computer. You need to enter only a
numeral in the fourth field.
Click Setup QoS Rule and the QoS Setup page appears: