NETGEAR WNR612

Netgear WNR612 Wireless Router User Manual
46
The following table describes parameters related to the WEP mode:
Field Description
Authentication
Type
You can select Automatic or Shared Keys. The default is
Automatic.
Encryption
Strength
Select the encryption strength of WEP. You can select 64-bit
or 128-bit.
Passphrase Enter a word or a string of printable characters, and click
Generate button. The wireless router automatically
generates four WEP keys. User may select one as the
encryption key of wireless network.
Key 1/2/3/4 Select one from the four keys and enter the corresponding
WEP key in the field.
If the Encryption Strength is set to 64-bit, enter 10
hexadecimal digits. The key can be any combination of 0-9
and A-F.
If the Encryption Strength is set to 128-bit, enter 26
hexadecimal digits. The key can be any combination of 0-9
and A-F.