Netgear WNR612 Wireless Router User Manual
71
The following table describes parameters and buttons in this page:
Field Description
Turn Access
Control On
Enable or disable wireless access control. If it is selected, you
can restrict wireless network cards according to their MAC
addresses.
Add Click the button to add an entry of wireless network card in the
Wireless Card Access Setup page that is displayed.
Edit Select an entry of wireless network card and click the button to
modify the device name or MAC address in the Wireless Card
Access Setup page that is displayed.
Delete Select an entry of wireless network card and click the button to
delete it.
Click the Add button and the Wireless Card Access Setup page appears:
To Next Page
Loading...
