NETGEAR WNR612

Netgear WNR612 Wireless Router User Manual
89
Field Description
Applications
Select an application that you want to set. If your desired
application is not in the drop-down list, select Add A New
Application.
Priority You can select Highest, High, Normal, or Low.
Connection Type
Indicates the protocol that is used at the port. You can select
TCP/UDP, TCP, or UDP.
Starting Port
The first port to which an application sends a connection
request. All relevant ports can be open only after connection is
established at this starting port. Otherwise, other relevant ports
are not open.
Ending Port Set the end port of the port range.
The QoS - Priority Rules page for an online game is as follows:
The following table describes parameters in this page: