NETGEAR WNR612

Netgear WNR612 Wireless Router User Manual
94
destination IP address, subnet mask, and gateway to specify a routing rule. The
destination IP address and subnet mask are used to determine a destination
network or host. Then, the router sends packets to the specified destination
network or host through the gateway.
Click Static Routes on the left pane of the page to display the following page.
In this page, you can add, edit, and delete a static routing rule, and view the current
static routing table in the router.
Click Add and the following page appears:
The following table describes parameters of adding a routing rule:
Field Description
Router Name Enter the name of the static route.
Active Enable it to apply the routing rule.
Destination IP
Address
Indicate the destination address or network that you want to
access.