ADSL2+ Modem Router User Manual
INFORMATION TO BE SUPPLIED TO USERS
We confirm that the following information will supplied to the users of this equipment. This
information will be provided with the user’s manual.
FCC REQUIREMENTS
This equipment complies with Part 68 of the FCC rules and the requirements adopted by the
ACTA. On the exterior of the cabinet of this equipment is a label that contains, among other
information, the FCC Registration Number and Ringer Equivalence Number (REN) for this
equipment. A product identifier in the format US: T58DL4311R. If requested, this number must
be provided to the telephone company.
FCC compliant telephone cord and modular plug is provided with this equipment. This
equipment is designed to be connected to the telephone network or premises wiring using a
compatible modular jack that is Part 68 compliant. See Installation Instructions for details. The
REN is used to determine the quantity of devices that may be connected to the telephone line.
Excessive RENs on the telephone line may result in the devices not ringing in response to an
incoming call. Typically, the sum of RENs should not exceed five (5.0). To be certain of the
number of devices that may be connected to a line (as determined by the total RENs) contact the
local telephone company. If this equipment causes harm to the telephone network, the
telephone company will notify you in advance that temporary discontinuance of service may be
required. But if advance notice isn’t practical, the telephone company will notify the customer as
soon as possible. Also, you will be advised of your right to file a complaint with the FCC if you
believe it is necessary. The telephone company may make changes to its facilities, equipment,
operations or procedures that could affect the operation of the equipment. If this happens, the
telephone company will provide advance notice so you can make the necessary modifications to
maintain uninterrupted service. For technical support, contact Netis Systems USA Corp. at
18541 Gale Avenue, City of Industry, CA 91748 or call TEL: 626-486- 9208. If the equipment is
causing harm to the telephone network, the telephone company may request that you
disconnect the equipment until the problem is resolved.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
