ADSL2+ Modem Router User Manual
80
Host: an IP address or host name you want to run trace route command
NumberofTriers: the number of try
Timeout: the time for the trace route command timeout
Datasize: date size of the trace route packet
DSCP
MaxHopCount: the maximum hop count
Interface: the interface to which the trace route is to be applied.
For example, you can set the host to www.baidu.com, and then click the “traceroute” button
to start the trace route process. Several times later, you can see the trace route result.
4.5.6.4 OAM loopback
To Next Page
Loading...
