ADSL2+ Modem Router User Manual
50
Nat Port rigger: enable or disable the port trigger function on the device
Application Type: you can select the service from the “Usual Application Name” or define the
name from “User-defined Application Name”
Start Match Port / End Match port: the start and end port to match
Trigger Protocol: the protocol to trigger the rule, it can be TCP, UDP or TCP/UDP
Start Relate Port / End Relate Port: the start and end relate port
Open Protocol: it can be TCP, UDP or TCP/UDP
NAT Type: it can be outgoing or incoming
4.3.2.6 FTP ALG Port:
FTG ALG port is used to configure the FTP server ALG and FTP client ALG ports.
Choose Advanced->NAT-> FTP ALG Port page, you can configure the ftp ALG ports.
To Next Page
Loading...
