WF-2405 User Manual
system parameter setting from a old parameter file.
Figure 3-63
3.14. About
This item shows company information of netis. If you want more information about netis,
please access this website http://www.netis-systems.com/
Figure 3-64
4. How to configure Client mode
4.1. Login web management page
Note: The DHCP server is disable under client mode, so you need to configure a static IP
address for WF-2405, then you can login the web page of the device.
Connect your device following the network topology in figure 2-4, then configure your
computer follow procedures below.
1) Select “My Network Places” on the desktop, right click, then choose “Properties”.
To Next Page
Loading...
