NETmc Marine DVR - Set-up

NETmc Marine DVR Manual-Rev7.2 Dec 2020 8 of 52
© NETmc Marine Ltd 2020
3. Set-up
It is important to plug in all video and audio connections before
switching on the DVR.
THIS EQUIPMENT MUST BE EARTHED.
1. Mount the DVR in a suitable rack mount system.
2. Connect the power supply. Note: this unit must be earthed. Note (2): we highly
recommend connection to a UPS (uninterruptible power supply) to prevent data loss.
3. Connect keyboard / mouse / monitor
4. Connect video / audio signals.
5. Power up the unit
6. Launch NETmc software from desktop icon.
7. Live video images should be displayed on screen.