NetPing Uniping server solution v3/SMS - [USS] a Device Overview; Function of a Device; Appearance of a Uniping Server Solution V3;Sms Device

[ENG] UniPing server solution v4/SMS & UniPing server solution v3, User guide -[USS] A Device Overview
[USS] A Device Overview
              –
•
•
•
•
•
•
•
•
•
•
[USS] A Device Overview
In this section, a function, an appearance and sensors that can be connected to a device are described.
Function of a Device
UniPing server solution v3/SMSandUniPing server solution v3are devices for monitoring the operation
environment of equipment in a server room.
A device helps to remotely track:
temperature;
humidity;
access control to a room, to closets and servers;
presence of smoke;
water leakage;
presence of 220V;
presence of motion in a room;
presence of shocks and vibrations
In addition, a device allows:
notifying about events in a server room through SNMP TRAP, SYSLOG, e-mail and SMS (for aUniPing server
solution v3/SMSdevice with a built-in GSM modem);
building a system of sound and light alerting using asiren alarm АS-10, light beacons and other indication
elements.
A monitoring device allows connecting a large number of various sensors. Readings of sensors may be taken
through SNMP, HTTP protocols, and using URL-encoded commands and SMS commands (for aUniPing server
solution v3/SMSdevice with a built-in GSM modem).
A device can be powered from an ordinary 220 V AC socket (internal battery) or from external power supply unit 5V
DC (1,5A).
Appearance of a UniPing server solution v3/SMS Device
A device has a standard size to be mounted in a 19' rack. A height of a device is 1U. The appearance is shown below:
Picture 1– Front panel
Picture 2– Back panel