NV-202 VDSL2 Bridge with DIP Switch USER’S MANUAL Ver. A4
2
Foreword: VDSL2 solution
Attention:
Be sure to read this manual carefully before using this product. Especially Legal Disclaimer, Statement
of Conditions and Safety Warnings.
NV-202 is a VDSL2 single port bridge equipped with two 10/100Mbps Ethernet ports that provide an economical solution for
commercial-grade applications. Compliant with ITU-T G.993.2 VDSL2 standard, the NV-202 supports a maximum bandwidth of up to
100Mbps symmetric in VDSL2 Profile (30a) solution. The NV-202 also supports both central office (CO) and customer-premises
equipment (CPE) modes selectable through DIP Switch.
Since VDSL2 has the characteristic of higher bandwidth over shorter distances, the ideal architecture for Telecoms is to use fiber
optic lines as the backbone and a VDSL2 line as the last mile into the home or office. With outstanding throughput, the NV-202 can
complement a fiber network to offer the best solution for delivering Triple play(Video/Voice/Data) or home entertainment services.
Caution:
The NV-202 is for indoor applications only. This product does not have waterproof protection, please do not use in outdoor
applications.
To Next Page
Loading...