NV-202 VDSL2 Bridge with DIP Switch USER’S MANUAL Ver. A4
24
Appendix B: Product Specification
Key Features & Benefits
• Supports RJ-11/Terminal Block combo for Line port.
• Supports high bandwidth up to 100Mbps symmetric over Line ports
• Support long reach mode up to 3 km with 24 gauge phone wire
• Support auto speed for Line port and Interleave mode selectable through CO side DIP switch
• DIP switch with CO and CPE mode selectable
• Supports long packet size up to 1536 bytes
• Supports Surge protection
• Supports wall mounting
• Supports DIN-Rail mount installation (Optional)
• Compact size and metal case design
• Supports point-to-point applications
Product Specification
Standard:
IEEE802.3 / IEEE802.3u standard
G993.2 VDSL2 standard
Physical Interface:
2 x RJ-45 10/100Mbps auto-negotiation Ethernet port
1 x RJ-11/Terminal Block connector for VDSL2 line port
To Next Page
Loading...