11
5.5 Log Set Installation
The logs are made of fragile material. Therefore, proceed with extreme caution when installing the logs.
NOTE: Log set instructions are shown with the flat bottom floor installed in the fireplace.
When installing the log set it is important that the logs are places exactly as shown in these instructions. If logs are not placed
correctly the projected flame will not line up with the logs. A letter is moulded on the bottom of each log to make identifying the
log easy.
Start the log set installation by placing the first three logs on in the fireplace as shown below. Logs “M” and “N” have cutouts in the
bottom of the logs to sit on the stands at the back of the fireplace. Place log “D” on the left side of the ember bed as shown.
To Next Page
Loading...
Need help?
General
