9 DISMANTLING AND ASSEMBLY
OF THE PUMP HOUSING
PAGE
9.D
The axial compression of the whole iFD-Stators
®
ensures that the optimal pre-stress is
provided for the rotor. At the same time the axial compression ensures the sealing of
the housing ends.
Tip:
Record the replacement interval directly on the stator.
The empty label fields on the stator housing are intended to be used to record, for
example, maintenance dates or rotor replacement intervals and can be filled in using a
standard fibre-tip pen.
Explosion protection
VDE-conform earthing must be provided for both housing parts (3001) and (3002)
when used in an explosion-protected area.
Stator-Protector STP-2A
Connection of the STP-2A is described in text no. 13105.
text no.
R 09101-2/2
issued: 2 Revision: 08.11.2010
copy to: BR, EX, I, LOG, RC
IPP - EN - EN_09101_20141105/4 - D8411276 - 4300003998 - 000100 - NPS - 00229929 N 2018-02-21 19:03:25
To Next Page
Loading...
