23
Warning!
The gearbox surface may heat up during operation.
• Allow the gearbox to cool down sufficiently after shutdown.
Information
Unusually low temperatures can cause sealing elements to freeze. As a result, the
gearbox can no longer fully meet warranted performance characteristics due to
leakage.
• The gearbox may only be operated within its technical specifications with regard
to the operating temperature.
• Ensure environmental conditions that prevent the sealing elements from freezing.
Information
Rotary shaft seals with a dust lip are initially greased between the sealing edge and
the dust lip. Harmless apparent leakage may occur here during the first few hours
of operation.
Operating Manual Gearbox
Commissioning and operation
To Next Page
Loading...