5
1.3 Designated use
The gearbox is intended exclusively for converting or transmitting torques, speeds
and for absorbing radial or axial loads in accordance with its technical specifications.
The gearbox may only be used for commercial and industrial reutilization.
1.4 Reasonably foreseeable misuse
Among other things, do not operate the gearbox in the following way:
• Without connecting element(s) on input or output shaft(s)
• Without monitoring and protective devices on the application side
• Outside the temperature range suitable for the lubricant
• Without consideration of the influence of the operating temperature on
the lubricant service life
• In potentially explosive atmospheres
• Outside the performance data provided in the technical specifications
Furthermore, interventions through technical modifications or conversions are not
permitted.
1.5 Warnings
Signal word
Explanation Consequences of non-compliance
Warning!
Possible imminent danger to life and
health
Serious injuries, including
death
Attention!
Possible imminent danger of property
or environmental damage
Damage to the drive system or its
environment
Information
Very important information: Simplifies
correct and safe installation and use of
the gearbox
Can lead to undesired developments
in the operating process
Operating Manual Gearbox
General notes
To Next Page
Loading...