28
Operating Manual Gearbox
Commissioning and operation
5.4.2 Maintenance operations
Information
The gearbox is maintenance-free during its expected service life. A rotary shaft seal
installed on the gearbox is a wearing part and may need to be replaced.
• The sealing elements must be protected from compressed air and aggressive
cleaning agents. For cleaning, use cold cleaning agents based on a gasoline
hydrocarbon.
• Only clean the gearbox when it is at a standstill.
• Have shaft seals changed by customer service.
• Opening the gearbox for maintenance purposes is not permitted.
5.4.3 Safety data sheets
Information
The corresponding safety data sheet can be obtained from customer service or at
www.neugart.com.
To Next Page
Loading...