User Manual
2.3.3 Enroll the user
1.Press the indoor Power Key 2.Press the Add Key
3.The reader will light after the beep. 4. Verify the super master or master
finger to get access
5. First available user will display.
Choose the user number by “+” or “-”
key. Then press OK (N°4 or N°99)
6. The reader will light, place the
finger of the user once
8. The registration is not complete if
the red light flash..
Remarks: The master could not be reregistered as a user.
-9-
8. Then place the finger of the user
one more time. The light will shine 3
times in sequence. The Operation is
complete.
To Next Page
Loading...