LB1005 Operating Manual Introduction
Bookham Revision 1 1
Chapter 1: Introduction
This manual contains information for operating the New Focus LB1005 High-
Speed Servo Controller. The LB1005 is a high-performance, standalone
instrument that provides the appropriate analog signal conditioning for
achieving stable feedback control. The LB1005 is particularly suited for high-
bandwidth filtering required to stabilize the intensity and frequency of many
laser systems. This chapter addresses pertinent safety issues and correct usage of
this instrument, as well as defines all front and rear panel connections. Please
carefully read this chapter before using the LB1005. Chapter 2 helps users
immediately get started using the LB1005 in their application, while Chapter 3
has more complete details of the operation of the LB1005.
Safety Considerations
The LB1005 is a versatile instrument that can be used in a variety of feedback
control applications. However, the LB1005 is not intended for fail-safe
operation in hazardous environments or life-threatening situations. The user
assumes full responsibility for correct and safe usage of the LB1005 in accordance
with any applicable laws, codes, regulations, and standards pertaining to their
specific application. Bookham is not liable for any consequential damage due to
misapplication or failure of the LB1005.
Table of Symbols
Alternating current
Caution – risk of electric shock
Caution – refer to manuals
Fuse
On (AC voltage supply)
Off (AC voltage supply)
To Next Page
Loading...