Newco CX-TOUCH - Calibration Procedures; Auger Calibration; Flow Meter Adjustment; Flow Meter Test


INSTALL CUSTOM LOGO
Install Logo Instructions-Custom Sleep Screen
(Android Version)
TAP3TIMESTOENTERPROGRAMMING
MODE‐‐IFABREWINGICONIS
ACCIDENTLYTOUCHEDUSETHERETURN
ARROWTOTRYAGAIN
2. INSTALLAFTPFILETRANSFERAPPONTOA
LOCALPHONEORTABLET.CONNECTTHE
LOCALPHONEORTABLETTOTHESAME
WIFINETWORKASTHECX‐TOUCH.
APPLICATIONEXAMPLESHOWNIS“FTP
EXPRESS”FORANDROID
SETUPFTPCONNECTIONASSHOWN‐COPY
INFORMATIONFROMCX‐TOUCHASSHOWN
ONSCREEN‐NOTE‐EACHMACHINEHASA
UNIQUEIPADDRESS

1. SAVESETUP
3. TOUCHSITETOOPENCONNECTION,
SELECT“LOCAL”WHENCONNECTED
5. TOUCHANDHOLDDOWN
IMAGEFILENAMETILLUP
ARROWAPPEARS.TOUCH
ARROWTOTRANSFERIMAGE
FINISH
4. CX‐TOUCHSCREENWILLCHANGETO
FINISH.PRESSTOEXIT,THENEXITSETUP
MENUS.TURNOFFWIFI,SEEPAGE19.
THISADDRESSISUNIQUEFOREVERY
MACHINE.NOTETHATITISUSEDFOR
THEHOSTADDRESSWHENSETTINGUP
COMMUNICATIONSITE
192.168.3.227
17