Need help?Do you have a question about the Newland HR3250 Marlin and is the answer not in the manual?
General| Brand | Newland |
|---|---|
| Model | HR3250 Marlin |
| Category | Barcode Reader |
| Language | English |
Provides an introduction to the Merlin corded scanner and its features.
Details the scanner's capabilities and the unpacking procedure.
Identifies scanner components and explains the meaning of LED indicators.
Details the data port pinout and guides on connecting the scanner to a host.
Provides instructions for connecting the scanner using USB or RS-232 cables.
Covers powering on/off, sleep mode, rebooting, and scanner care.
Presents the physical dimensions of the scanner from different views.
Step-by-step guide on how to scan barcodes with the scanner.
Introduces QuickSet, a Windows-based software for scanner configuration.
Overview of the three methods for configuring the scanner.
Explains barcode, command, and QuickSet programming for scanner setup.
Configures illumination options and beep feedback for scanner operations.
Details manual, sense, continuous scan modes and scanning preferences.
Adjusts decode session timeouts and defines the decoding area.
Covers restoring factory defaults and managing custom default settings.
Explains how to obtain and transmit product information from the scanner.
Guides on connecting via RS-232 and setting communication parameters.
Details Baud Rate, Parity Check, Data Bit, and Stop Bit configurations.
Manages data flow control using RTS/CTS signals for RS-232 communication.
Presents the four available USB connection interface options.
Configures scanner for HID-KBW mode and sets country keyboard types.
Covers Emulate ALT+Keypad and Function Key Mapping features.
Manages character case conversion and numeric keypad emulation.
Details USB DataPipe, COM Port Emulation, and HID-POS interfaces.
Overview of symbologies and general settings for enabling/disabling them.
Enables or disables support for 1D and 2D barcode symbologies.
Configuration for Code 128, EAN-8, EAN-13, UPC-E, UPC-A.
Covers length ranges and check digit verification for various symbologies.
Configuration for Code 39, Codabar, QR Code, and other symbologies.
Configuration options for PDF417, Aztec, Data Matrix, and Maxicode.
Configuration for Chinese Sensible Code and its variants.
Explains how prefixes and suffixes customize scanned barcode data.
Enables/disables all prefixes/suffixes and defines prefix sequences.
Configures custom prefixes and AIM/Code ID prefixes for data.
Configures custom suffixes and terminating characters for data transmission.
Overview of extracting specific data parts and packing data into formats.
Enables, disables, and erases data extraction options for symbologies.
Defines extraction rules for 1D and 2D barcodes using digit barcodes.
Describes the Normal Pack data format for transmitting data.
Explains integrating multiple commands into a single batch barcode.
Details syntax for batch commands and generating/using batch barcodes.
Overview and enabling/disabling the data formatter feature.
Introduces commands for manipulating data strings within the formatter.
Covers commands for sending, moving cursor, and searching data.
Details commands for suppressing and replacing characters.
Provides digit barcodes, alphabet barcodes, and save/cancel barcodes.
Lists factory default settings and AIM/Code ID tables for symbologies.
Reference table for ASCII character codes and their hex/decimal values.
To Next Page