Newland NLS-HR42 - User Manual

NLS-HR42
2D Handheld Barcode Scanner
User Guide

Summary

Chapter 1 Getting Started

Connecting the HR42 to a Host Device

Scanning Instructions

Chapter 2 EasySetEX

Chapter 3 System Settings

Barcode Programming

Command Programming

Scan Mode

Default Settings

Options to restore factory or custom default scanner settings.

Chapter 4 RS-232 Interface

Baud Rate

Sets the data transmission speed (bits per second) for RS-232.

Parity Check

Configures the parity type (None, Odd, Even) for RS-232 data.

Stop Bit

Configures the number of stop bits (1 or 2) for RS-232 serial data.

Chapter 5 USB Interface

USB HID Keyboard

Enables the scanner to function as a USB keyboard input device.

Chapter 6 Symbologies

Global Settings

Code 128

Configuration settings for the Code 128 barcode symbology.

EAN-8

Configuration settings for the EAN-8 barcode symbology.

EAN-13

Configuration settings for the EAN-13 barcode symbology.

UPC-E

Configuration settings for the UPC-E barcode symbology.

UPC-A

Configuration settings for the UPC-A barcode symbology.

Interleaved 2 of 5

Configuration settings for the Interleaved 2 of 5 barcode symbology.

Code 39

Codabar

QR Code

Data Matrix

Chapter 7 Data Formatter

Add a Data Format

Data Format Selection

Chapter 9 Batch Programming

Create a Batch Command

Use Batch Barcode

Newland NLS-HR42 Specifications

General

Brand	Newland
Model	NLS-HR42
Category	Barcode Reader
Language	English