FLEX Quick Guide
When connecting to the line out port, a dialogue box will appear prompting to choose single or double screen mode. In single
screen mode, the line out outputs left and right channels, but the embedded speakers will not have any output. In double screen
mode, both the embedded speakers and line out will have sound.
When the volume adjustment buttons are pressed, the volume adjustment indicator appears on the screen. The volume can be
adjusted and muted / unmuted using the on-screen indicator.
The dynamic USB 3.0 port will automatically switch to any connected device for easy access. The modular camera and
integrated microphone will automatically switch to the active source.
・
Notes
By default, the SDM source is automatically selected. When other sources are detected, a dialogue box will appear allowing user
to switch sources.
To Next Page
Loading...
Need help?
General
