Unpacking the FSM 23
4. Unpacking the FSM
4.1 Packing List
Included with each FSM System are the following items:
• FSM-300 Mirror Head
• FSM-CD300B controller/driver
• FSM-CD300B controller/driver interconnect cable, 3 m
• Allen wrench for protective cover of Mirror Head
• Instruction manual
4.2 Freeing the Mirror Head
Figure 6: Protective lens tape and metal cover for mirror.
For shipment, the FSM mirror is secured by adhesive lens tape plus an oval,
hinged metal cover, as illustrated in Figure 6. To free the mirror, loosen the
two diagonally opposed retaining screws so that the protective cover can be
pivoted for easy removal. The appropriate Allen wrench is supplied with the
mirror head. Once the cover is removed, gently pull off the lens tape. Store
the lens tape inside a clean polyethylene bag for possible later use.
To Next Page
Loading...
