Nexcom DNA 1120 - Boot

Copyright © 2011 NEXCOM International Co., Ltd. All Rights Reserved.
58
Chapter 4: BIOS Setup
DNA 1120/1120A User Manual
Boot
Boot Settings Configuration
This section is used to configure settings during system boot.
Boot Device Priority
This section is used to select the boot priority sequence of the devices.
Hard Disk Drives
This section is used to select the boot priority sequence of the hard disk
drives.
Congure settings
during system boot.
BIOS SETUP UTILITY
ExitChipset
v02.61 (C)Copyright 1985-2006, American Megatrends, Inc.
← → Select Screen
↑↓ Select Item
Enter Go to Sub Screen
F1 General Help
F10 Save and Exit
ESC Exit
SecurityMain Advanced PCIPnP
Boot Settings
u
Boot Settings Conguration
u
Boot Device Priority
u
Hard Disk Drives
Boot
Boot Settings Configuration
This section is used to configure settings during system boot.
BIOS SETUP UTILITY
v02.61 (C)Copyright 1985-2006, American Megatrends, Inc.
← → Select Screen
↑↓ Select Item
+- Change Option
F1 General Help
F10 Save and Exit
ESC Exit
Boot Settings Conguration
Quick Boot
Quiet Boot
AddOn ROM Display Mode
Bootup Num-Lock
PS/2 Mouse Support
Wait for ‘F1’ If Error
Hit ‘DEL’ Message Display
Interrupt 19 Capture
[Enabled]
[Disabled]
[Force BIOS]
[On]
[Auto]
[Enabled]
[Enabled]
[Disabled]
Quick Boot
When Enabled, the BIOS will shorten or skip some check items during
POST. This will decrease the time needed to boot the system.
Quiet Boot
Enabled Displays OEM logo instead of the POST messages.
Disabled Displays normal POST messages.
Allows BIOS to skip
certain tests while boot-
ing. This will decrease
the time needed to boot
the system.
Boot