PRODUCT FEATURES PS15Bass
Components :. 1 x 15" (38 cm) proprietary. Identical to the PS15 LF unit
Height x Width x Depth. 675 x 434 x 457 mm (26.57"x 17.08"x 17.99")
Weight : Net 26 kg (57 Lb)
Speakon Connectors 2 x 4 poles (Passive In & Loop Thru) + 1 x 4 pole (Active)
Construction Baltic Birch Ply finished with structured black coating
Fittings : Handles 2 Metal Handles
Front Finish Acoustic foam on Hex perforated steel grille (77% transparent)
Flying Points 1 steel anchor plate for flying track on bottom (9 positions).
2 steel anchor plates for flying tracks on top (3 positions).
PRODUCT FEATURES PS15 TDcontroller MK2
Audio Inputs Two L&R Audio inputs. Electronically balanced, 50 kOhm. Two XLR-3F connectors.
Sense Inputs Three Amplifier Sense Inputs (PS15 L&R, LS1200). 180 kOhm. on 6 Pole Removable Strip Terminal.
Audio Outputs Two L&R (HF&LF in active mode) PS15 Audio outputs. Electronically balanced, 50 Ohm. On two XLR-3M.
One Mono (L+R) LS1200 Audio output. Electronically balanced, 50 Ohm.
Specifications
Output Level : +28 dBu Max on 600Ω - 1nF load.
Noisefloor (22 Hz - 22 kHz, Unweighted, output level 0dB) L&R: -90 dBm, Sub : -70 dBm.
THD+N : < 0.03% Typ. 0.05% Max. for +20 dBm Output
Controls & Indicators Front panel : Overlap / Crossover switch, Speaker Protect LED's, Amp Sense & Peak LED's, Bass EQ
trimmers (+/- 3dB). 3 Peak limiters adj. trimmers, one gain control trimmer per channel.
Back panel : Gain switch -6/0/+6 dB.
Internal : 3 protection trimmers. Switching Active/Passive.
Power Supply 115/230 Volts (switch on back panel), 50/60 Hz. Earth-Lift (switch on back panel)
Dimensions & Weight 1U 19" Rack. 210 mm (8.5") Depth. 3.3 kg 7.3 (Lb.) net
SHIPPING & ORDERING
Packaging PS15's are sold as pairs with PS15TD
Shipping weight & Volume PS15 : 32 Kg (70 lb.) 0.2 cum (7 cu feet). PS15 TD : 3.85 Kg (8.47 lb.) 0.02 cu m (0.6 cu feet)
Ref. LS1200 : 49 kg (108 lb.)0.32 cu m (11 cu feet)
Accessories Flying Kit (Ref.: FLYPS15) containing 1 x PS15 Top Rail, 2 x PS15 Bottom Rails, 4 x Single Stud Flying Rings.
Mast Adapter Kit (Ref.: STDUPS15) containing 1 m (39") long mast & U coupler supporting 1 or 2 PS15 above
LS1000.
As part of a policy of continual improvement, NEXO reserves the right to change specifications without notice.
[a] Response curves & data : Anechoic Far Field for the PS15 + PS15TD. Half-Space Anechoic radiation for the LS1000 + PS15TD.
[b] Sensitivity & Peak SPL data : these will depend on spectral distribution and crest factor of program material. Measured with band limited Pink Noise.
Nominal refers to Voice Decade (300 Hz - 3 kHz), Wideband to the specified ±3 dB range. Data are for speaker + processor + recommended amplifier
combinations. Peak SPL is at clipping of recommended amplifier. Measurements made with PS15's in passive operation mode.
[c] Directivity curves & data : obtained by computer treatment on off axis response curves.
Omnimount is a registered trade mark of Omnimount Systems Inc.
Dimensions
To Next Page
Loading...
Need help?
General
