INTRODUCTION
Thank you for selecting NEXO PS Series equipment. This manual will provide you with useful and
important information about your PS speaker system:
• PS8 & optional LS400 sub bass
• PS10 & optional LS500 sub bass
• PS15 & optional LS1200 sub bass and PS15Bass
The PS15 can be used in either passive or bi-amped mode (two-way active).
Please devote some time reading this manual. A better understanding of some specific features of
the PS series (like the asymmetrical directivity horn configuration) will help you to operate your
system to its full potential.
LOUDSPEAKERS
General Setup Instructions
TDcontroller use
Performance, sound quality and reliability of these speaker systems are entirely dependent on proper
setup and use of the appropriate TDcontroller: We strongly recommend that all new users carefully read
this manual with regard to the specific setup and use of the TDcontroller.
• PS8 TDcontroller for PS8 systems (with or without LS400).
• PS10 TDcontroller for PS10 systems (with or without LS500).
• PS15 TDcontroller MK2 for PS15 systems (with or without LS1200).
• NX241 Digital TDcontroller set on the appropriate set-up (See “NX241 User Manual”)