EasyManuals Logo

NextBase 322GW User Manual

NextBase 322GW
48 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #13 background imageLoading...
Page #13 background image
13
In Vehicle Installation (cont.)
8 Attach the Adhesive pad to the windscreen
Firmly press the adhesive pad to the clean area of windscreen.
Press for 5 seconds to ensure a strong bond between the pad and windscreen.
Note: When positioning the pad on the windscreen, ensure that the thick end is pointing down,
with the ‘notch’ at the bottom. This will allow you to attach the mount the correct way up.
9 Reattach the mount to the adhesive pad
Ensure that the adhesive pad is securely attached to the windscreen.
Slide the mount back onto the pad, moving from left to right.
A click will be heard when the mount connects to the pad
Check that the mount is securely attached.
10 Connect power and Dash Cam
Connect the power cable to the mount (attached to the windscreen).
Connect the Dash Cam to the mount using the magnetic pull to guide the Dash Cam.
Once the Dash Cam is connected, check that the Dash Cam feels secure.
5s
!
8
9
10

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the NextBase 322GW and is the answer not in the manual?

NextBase 322GW Specifications

General IconGeneral
Night visionYes
Product colorBlack, Silver
Country of originChina
Languages supportDEU, DUT, ENG, ESP, FRE, ITA, NOR
Number of cameras1
Maximum frame rate60 fps
Power cable length4 m
Collision detectionNo
Aperture range (F-F)1.6 - 1.6
Main camera resolution1920 x 1080 pixels
Main camera viewing angle140 °
Video compression formatsMP4
Main camera sensor resolution2.12 MP
Battery life15 min
Battery weight6 g
Output current2 A
Output voltage3.7 V
Battery capacity320 mAh
Operating voltage12 V
Power source typeBattery, Cigar lighter
Input operation voltage (max)24 V
Storage temperature (T-T)-20 - 45 °C
Display diagonal2.5 \
Display resolution (numeric)311 pixels
Compatible memory cardsMicroSD (TransFlash)
Maximum memory card size128 GB
Quantity per pack7 pc(s)
Accessories includedVdc Car Power Cable, Cable Tidy Tool, Click & Go Powered Mounts: Adhesive
Package typeBox
Package width85 mm
Package height45 mm
Package weight410 g
Quantity per pallet720 pc(s)
Master (outer) case width280 mm
Master (outer) case height370 mm
Master (outer) case length330 mm
Master (outer) case weight1025 g
Customs product code (TARIC)8525890000
Master (outer) case GTIN (EAN/UPC)5060384255675
Export Control Classification Number (ECCN)EAR99
Number of shipping (inner) cases per master (outer) case20 pc(s)
Weight and Dimensions IconWeight and Dimensions
Depth47 mm
Width82 mm
Height46 mm
Weight82 g

Related product manuals