VIDEO MODE
5
2
14
1
3
4
6
7
8
9
10
12
13
11
17
16
15
The information given below explains the various items that are displayed on the screen when your
iN-CAR CAM is in Video mode, some items will only be displayed once the relevant function has been
selected within the Video menu, as described below.
1. WDR: remains on screen permanently as the iN-CAR CAM utilises WDR technology.
2. Recording: appears on screen and flashes red when a recording is in progress.
3. Mode: indicates the iN-CAR CAM is in Video mode.
4. Resolution: displays the current resolution.
5. Video Length: displays the length of the individual recordings in minutes.
6. Exposure: displays the exposure level.
7. Microphone: Indicates whether audio recording is switched On or Off.
8. Power: displays power source being used (external or battery).
9. GPS: the icon will flash whilst the iN-CAR CAM locates satellites. Once a stable signal is
received, the icon will stop flashing and remain on screen.
10. White Balance: displays the white balance setting.
11. Compass / Speed Display icon: Shown on screen when function has been turned on.
12. Driver Fatigue icon: Shown on screen when function has been turned on.
13. Time: current time.
14. Date: current date.
15. Recording Time: displays the length of current recording.
16. Memory Card: indicates whether a memory card is present.
17. Protected File: shown on screen when a video file has been protected by activation of the
internal G Sensor or by pressing the file protect button.
See the next page for full details of the options available within Video mode.
14
To Next Page
Loading...
Need help?
General
