GENERAL SETTINGS MENU
The General Settings menu is accessed by pressing the menu button twice, use the up and down
buttons to highlight function and press the OK button to enter the options screen.
Select the required option and press OK to confirm, press menu once more to exit.
Note:
- Menus are not accessible whilst the iN-CAR CAM is recording. Stop recording to access this menu.
1. Format SD Card
Format the inserted memory card, this will delete all content.
A good practice monthly to ensure your SD card performs to it’s full potential.
2. Language
Select preferred language, options available are as follows -
English, Français, Español, Nederlands, Sverige, Norsk, Suomi, Dansk
Default Setting: English
3. Date / Time
Adjust the date / time as required using the OK button to toggle through fields, use the UP
and DOWN buttons to set variables.
4. Time Zone / DST
The Time and Date is automatically set from the satellite signal, but can be adjusted
dependent upon your Time Zone (country) or whether Daylight Savings Time (DST) is
operational.
Default Setting: GMT
5. Speed Units
Select whether to record and display speed in KMH or MPH.
Default Setting: MPH
6. Screen Standby
Turn on the Screen Saver function, this will shut down the screen after a period of inactivity.
Press any button to re-activate the display.
Default Setting: Off
7. Beep Sound
Turn Off / On the beep sound.
Default Setting: On
8. TV Mode
Set the TV Mode as required.
Default Setting: PAL
9. TV Frequency
Set the Frequency as required.
Default Setting: 50Hz
21
To Next Page
Loading...
Need help?
General
