PARTS & CONTROLS
Please see below to identify the parts and controls of your iN-CAR CAM.
1. Record / OK button
Record:
Press to start or stop a recording when in video mode, or take a photo when in photo mode.
OK:
Press to confirm selection when in menus.
2. Power button
Press and to turn on / off the iN-CAR CAM.
3. Mounting point
Attached the supplied window mount here.
4. AV Out socket
For use with an AV Cable (sold separately), please contact your local Nextbase retailer to
purchase.
5. Mini USB socket
Connect the supplied car power cable or USB data cable here.
6. Polarising filter Rear Ring
Use this ring to remove / install the polarising filter on to the camera lens if necessary.
Adjust to finger tight once fitted.
7. Polarising Filter Front Ring
Rotate this ring to adjust the function of the polarising filter. See over.
Continued overleaf.
08
1 2 3
4
5
6
7
To Next Page
Loading...
Need help?
General
