PARTS & CONTROLS (CONTD.)
Please see below to identify the parts and controls of your iN-CAR CAM.
8. RESET button
In the unlikely event the iN-CAR CAM becomes unresponsive press the RESET button to restart
the iN-CAR CAM.
9. HD OUT socket (under dust cover)
For use with the supplied High Definition cable.
10. Speaker
11. Polarizing filter
The polarising filter can be adjusted by rotating the front ring to reduce reflections from the inside
of the windscreen being captured during recording.
To set the polarising filter, place a piece of paper on your dashboard below the rear view mirror,
but away from the windscreen. With the camera turned ON, you will see the reflection of the paper
in the LCD screen. Rotate the front ring of the polarising filter to reduce reflection to the lowest
possible level. This dramatically improves the recorded image quality.
Note:
- Do not place fingers on the glass lens of the filter.
- Do not adjust the filter whilst in control of the vehicle.
12. MicroSD card slot
Insert the MicroSD card here, note that the gold contacts of the memory card are to be screen
side, when inserted.
Use the edge of a small coin (or similar object) to push the memory card in place if required.
Take care that card has ‘clicked’ into place, a second push inwards will release the memory
card.
Continued overleaf.
9
11
10 8
12
HD OUT
09
To Next Page
Loading...
Need help?
General
