VIDEO MODE (CONTD.)
Video settings menu continued.
11. Driver Fatigue Warning
Set the timer which will display an image of a hot beverage to serve as a reminder to take
sufficient rest when on a long journey.
Default Setting: Off
12. HUD Speed & Compass
When turned on, the screen will display current speed and a compass after the selected
period of time, press any button to return to normal viewing, this function is only available
when a GPS connection is present.
Default Setting: Off
13. Video Length
Select duration of recording length for the individual video files, the iN-CAR CAM will fill the
SD Card then loop back to the beginning, overwriting the oldest files (unless protected).
Default Setting: 3 Minutes
14. Motion Detection
Turn On / Off the motion detection function, the device will need to remain on (powered from
a permanently live 12Vdc supply) and will start a 10 second recording when a change to the
viewed scene is detected.
Default Setting: Off
Note:
- Set to Off (default) during normal driving in order to record continuously, as not all driving
will trigger close motion being detected.
15. Rotate Display
Rotate the display 180°, particularly useful should the iN-CAR CAM be mounted on the
dashboard, the iN-CAR CAM control button functions do not rotate.
Default Setting: Off
The default settings have been carefully selected to allow you to use the In-CAR CAM without the
need to change any settings.
Note:
- Within the General Settings menu which is accessed by pressing the MENU button twice, there is
a ‘Default Settings’ option to allow you to reset the iN-CAR CAM to the factory defaults, if required.
16
To Next Page
Loading...
Need help?
General
