EasyManuals Logo

NextBase 522GW User Manual

NextBase 522GW
48 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #13 background imageLoading...
Page #13 background image
13
In Vehicle Installation (cont.)
8 Attach the Adhesive pad to the windscreen
Firmly press the adhesive pad to the clean area of windscreen.
Press for 5 seconds to ensure a strong bond between the pad and windscreen.
Note: When positioning the pad on the windscreen, ensure that the thick end is pointing down,
with the ‘notch’ at the bottom. This will allow you to attach the mount the correct way up.
9 Reattach the mount to the adhesive pad
Ensure that the adhesive pad is securely attached to the windscreen.
Slide the mount back onto the pad, moving from left to right.
A click will be heard when the mount connects to the pad
Check that the mount is securely attached.
10 Connect power and Dash Cam
Connect the power cable to the mount (attached to the windscreen).
Connect the Dash Cam to the mount using the magnetic pull to guide the Dash Cam.
Once the Dash Cam is connected, check that the Dash Cam feels secure.
5s
!
8
9
10

Other manuals for NextBase 522GW

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the NextBase 522GW and is the answer not in the manual?

NextBase 522GW Specifications

General IconGeneral
Product colorBlack, Silver
G-shock sensorNo
GPS (satellite)Yes
Country of originChina
Number of cameras1
Maximum frame rate30 fps
Power cable length4 m
Aperture range (F-F)1.3 - 1.3
Main camera resolution2560 x 1440 pixels
Main camera sensor size1/3 \
Main camera viewing angle140 °
Video compression formatsMP4
Main camera sensor resolution5.14 MP
Compatible memory cardsMicroSD (TransFlash)
Maximum memory card size128 GB
Display diagonal3 \
Battery life15 min
Battery weight7 g
Output current2 A
Output voltage3.7 V
Battery capacity320 mAh
Operating voltage12 V
Power source typeBattery, Cigar lighter
Input operation voltage (max)24 V
Cables includedMini-USB
Quantity per pack7 pc(s)
Accessories includedVdc Car Power Cable, Cable Tidy Tool, Click & Go Powered Mounts: Suction and Adhesive
Quantity per pallet720 pc(s)
Master (outer) case width230 mm
Master (outer) case height370 mm
Master (outer) case length330 mm
Master (outer) case weight1000 g
Customs product code (TARIC)8525890000
Quantity per master (outer) case20 pc(s)
Master (outer) case GTIN (EAN/UPC)5060384255712
Export Control Classification Number (ECCN)EAR99
Package depth66 mm
Package width153 mm
Package height125 mm
Package weight456 g
Weight and Dimensions IconWeight and Dimensions
Depth45 mm
Width94 mm
Height53 mm
Weight125 g

Related product manuals