24
Compliance
Warnings & Cautions
SAFETY
Please read safety and health information carefully before you install your iQ so that you can ensure its safe and proper operation in your
vehicle.
WARNING
Failure to correctly install Piqo may present hazards for the safe operation of your vehicle and could contribute to an accident resulting in serious
injury, death or damage to property for you, your passengers or others. When installing this device in your vehicle;
WARNING
You should not attempt to manually adjust Piqo’s setting whilst driving. Always maintain awareness of your surroundings and do not attempt to
adjust Piqo whilst driving. Distractions whilst driving increase the risk of an accident that could lead to serious injury, death or property damage.
CAUTION
Ensure that you check the warranty status for your vehicle before you install the Piqo Quick Connect Cable. Some manufacturers may prohibit
the use of OBD-II connections which could void your warranty agreement. NEXTBASE IS NOT RESPONSIBLE FOR ANY COSTS OR EXPENSES ASSOICATED
WITH VOID WARRANTIES OR VEHICLE REPAIRS.
If you experience any change in your vehicle's engine performance after connecting the Piqo Quick Connect Cable, you should disconnect the
device as soon as it is safe to do so and contact Nextbase Technical Support. DO NOT CONTINUE TO USE PIQO QUICK CONNECT CABLE IF VEHICLE
ENGINE POWER IS AFFECTED
CAUTION
Do not expose Piqo to liquids under any circumstances, doing so may result in the risk of electric shock or fire. Should your Piqo become wet,
disconnect it from the Power Cable and allow it to dry naturally.
DO NOT ATTEMPT to accelerate drying by external means.
CAUTION
You should only use Piqo in compliance with all applicable laws, including local laws of the country and region in which you reside or in which
you use your Piqo. When you use Piqo, you do so at your own initiative and you are responsible for compliance with any applicable laws,
including but not limited to applicable privacy and data collection laws, and laws prohibiting or restricting the placement of objects on the
windshield of a motor vehicle.
PSTI Statement of Compliance
We, Portable Multimedia Limited t/a Nextbase. hereby declare under our own responsibility that the devices comply with the NBPICO1 & NBPICO2
applicable security requirements in Schedule 1 of The Product Security and Telecommunications Infrastructure (Security Requirements for
Relevant Connectable Products) Regulations 2023.
1. Password is unique per device or defined by the user of the device, and the password which is unique per device is generated by using as
security mechanism that reduces the risk of automated
attacks against a class or type of device.
2. Users can report vulnerabilities to Nextbase as per our Vulnerability Disclosure policy available via https://nextbase.co.uk/vulnerability-
disclosure-policy , users will receive acknowledgment of the receipt
of a security issues report and status updates until the resolution of the reported security issues.
3. We will provide security updates for this product during the support period. The defined support period is listed here
https://nextbase.co.uk/security-maintenance-period-policy
Failure to follow these guidelines may cause harm to your device, your property, your health or the health of others.
You must correctly locate Piqo on your windshield. Mounting Piqo in a position that obscures the forward line of sight for the driver
of your vehicle may cause the driver of your vehicle to be unable to adequately see other road users, obstacles or persons around
your vehicle. This could result in an accident that causes serious injury, death or property damage. Carefully follow the mounting
instructions in your app and in the installation section of this manual.
You must adequately secure Piqo to your windshield. The 3M pad supplied with your Piqo consists of a pressure activated tape.
If an inadequate bond is achieved whilst fitting Piqo may separate from the windshield. If this occurs whilst the vehicle is being
driven, it could become a restriction to safe operation of your vehicle leading to an accident that causes serious injury, death
or property damage. Stop your vehicle as soon as it is safe to do so and disconnect Piqo. Only attempt to refit Piqo with a new
3M pad when your vehicle is stationary.
You must route the Piqo power cable (or optional accessory Pro Install Cable or Piqo Quick Connect Cable) appropriately.
You must route the power cable (and rear camera cable if you are fitting a Rear Window Camera) so that there is no interference
with the deployment of airbags installed on your vehicle. If you impede the deployment of airbags, you will reduce the effectiveness
of the secondary protection system which could result in serious injury, death or property damage. You must also ensure that cables
do not interfere with vehicle operating controls. If you are hindered from correctly accessing vehicle controls whilst driving, it may
cause an accident which could result in serious injury, death or property damage.
Caerphilly, UK
th
15 April 2024
Keelan O'Connor
Quality and Compliance Manager Nextbase
Place of declaration issue:
Date of Issue:
Issued by:
Signature:
For more information or support visit nextbase.com/hub/tag/support
This manual is also available at nextbase.com /piqo-install
To Next Page
Loading...
