NextBase piqo - Compliance

To Next Page

To Previous Page

Product Compliance Information

Warranty Information

Please see our returns and warranty policy at nextbase.co.uk/help-and-support/warranty-information

Product Wireless Information

2400–2483.5 MHz: Wi-Fi (Max 15.9 dBm), BT (Max 3.3 dBm)

ACMA RCM Notice to Users in Australia & New Zealand

Having had regard to documents submitted, our Authorised Agent (EMD AUSTRALIA PTY LTD RCMC24101402D) is satisﬁed that the in-vehicle accessory

products NBPICO1 & NBPICO2 comply with the requirements of the relevant ACMA Standards made under the Radiocommunications Act 1992 and the

Telecommunications Act 1997. The full compliance declaration, including the details of the applicable standards and documents submitted can be found

on our website at https://www.nextbase.com/certiﬁcations

Hereby, Portable Multimedia Limited declares that the radio equipment type NBPICO1 & NBPICO2 Dash Cam is in compliance with Directive 2014/53/EU. The

full text of the EU declaration of conformity is available at the following internet address: https://www.nextbase.com/certiﬁcations/

UKCA

Hereby, Portable Multimedia Limited declares that the radio equipment type NBPICO1 & NBPICO2 Dash Cam is in compliance with UK Regulation S.I. 2017 No.

1206 . The full text of the UKCA declarations of conformity are available at the following internet address: https://www.nextbase.com/certiﬁcations/

Product Disposal

RF Exposure Information (MPE)

This device meets the EU requirements and the International Commission on Non-Ionising Radiation Protection (ICNIRP) on the limitation of exposure of

the general public to electromagnetic ﬁelds by way of health protection. To comply with the RF exposure requirements, this equipment must be operated

in a minimum of 20 cm separation distance to the user.

RF Exposure Statement FCC

This equipment complies with the FCC RF radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and

operated with a minimum distance of 20cm between the radiator and any part of your body.

FCC Statement:

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions

(1) the device may not cause harmful interference, and

(2) the device must accept any interference received, including interference that may cause undesired operation.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are

designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio

frequency energy and, if not installed in accordance with the instructions, may cause harmful interference to radio communications. However, there is no

guarantee that interference will not occur in a particular installation. If this equipment does casue harmful interference to radio or television reception,

which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following

measures:

- Reorient or relocate the receiving antenna.

- Increase the separation between the equipment and the receiver

- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.

- Consult the dealer or an experienced radio/TV Technician for help.

- This appliance and its antenna must not be located or operated in conjunction with any other antenna or transmitter.

- A minimum separation distance of 20cm must be maintained between the antenna and the person for the appliance to satisfy the RF exposure

requirements

FCC Caution

This product dies not contain any user serviceable parts. Repairs should only be made by an authorised Nextbase™ service centre. Unauthorized repairs

or modiﬁcations could result in permanent damage to the equipment, and void your warranty and your authority to operate this device under Part 15

regulations.

FCC Identiﬁer and ISED Certiﬁcation Number

The device meets the FCC Radio Frequency Emission Guidelines and is certiﬁed with the FCC. Information about this product is on ﬁle with the FCC and

can be found by inputting the Product's FCC ID (available on the product gift box and as an e-label accessible as per the information given above) into

the FCC ID. Search form available at: https://www.fcc.gov/oet/ea/fccid

The party responsible for FCC compliance is:

Portable Multimedia Limited, 230 Blackfriars Road, London, England, SE1 8NW

To contact Nextbase about the device's FCC equipment authorization, please write us at the address shown above or contact us using the following

address: compliance@nextbase.co.uk.

IC Warning

This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions:

(1) this device may not cause interference, and

(2) this device must not accept any interference, including interference that may cause undesired operation of the device.

Le présent appareil est conforme aux CNR d'Industrie Canada applicable aux appareils radio exempts de licence. L'exploitation est autorisée aux deux

conditions suivantes:

(1) l'appareil ne doit pas produire de brouillage, et

(2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillge est susceptible d'en compromettre le fonctionnement.

This device has been evaluated to meet general RF exposure requirement. To maintain compliance with RSS-102 - Radio Frequency (RF) Exposure

guidelines, this equipment should be installed and operated with a minimum distance of 20cm between the radiator and your body.

le depositif de a été évalué à répondre général rf exposition exigence. Pour maintenir la conformité avec les directives d'exposition du RSS-102 - Radio