17
•
Serial no. Set: O/On (can only be used for photos not for videos)
Select "On" to assign a serial number to the camera. As soon as "On" has been conrmed by pressing
the OK button, the individual serial number can be inserted.
You can use a combination of 4 digits and letters to document the location on the photos (e.g. YSP1
for Yellow Stone Park). When using several cameras this makes it easier to identify the location when
viewing photos.
•
Time lapse: O/On
When "On" has been selected, the camera automatically takes photos or videos in the selected time
interval, irrespective of whether or not the PIR sensor has detected a motion or not. This is useful for
observing cold blooded animals e.g. snakes or plants opening up, etc.
As soon as the "On" setting has been conrmed by pressing the OK button, you can enter the interval
time after which photos and videos are to be taken.
•
Language: Select the desired menu language
The following languages are available: English, German, Danish, French, Italian, Dutch, Spanish,
Hungarian, Portuguese, Chinese.
•
Format: No/Yes
All les are deleted by formatting the memory card. Press OK button and conrm formatting by
selecting "Yes".
We recommend formatting the memory card if it has already been used in other devices or if it is a
new card.
Caution: Ensure that les still required have been backed up prior to formatting!
•
Set clock: Set date and time
Press OK button to set date and time. Using the and buttons to skip between values and
change selected values by pressing the and buttons. Conrm your setting by pressing the OK
button.
Note:
•
If you forgot your password, please unlock the camera with password “OPEN”.
To Next Page
Loading...
