140
nextel.com
Phone Setup
Phone Setup sets some basic phone features. Access Phone Setup to set the
following options:
• Line—enables you to choose Line 1 or Line 2 as the active line for outgoing
calls.
• AutoAns—sets your phone to automatically answer an incoming call after a
specified number of rings. When this feature is turned on, the phone answers
by connecting you to the caller; it does not send the call to Voice Mail, unless
you are out of coverage or on another call.
• Any Key—when turned on, enables you to answer calls by pressing any key
on the alphanumeric keypad.
• Phone Only—when turned on, prevents your phone from making or
receiving Private calls or Group calls.
• Network ID—enables you to set the phone’s network IDs under the
direction of a Nextel Customer Care Representative.
In Call Setup
In Call Setup sets the in-call timer, message notification, and call waiting
features.
NOTE: These features affect phone calls only, not Private Calls.
• In Call Timer—turns the following features on and off:
• Display—the duration of each call displays on the phone’s screen when
the call ends.
• Minute Beep—an audible beep occurs every minute of an active call at
the 50 second mark.
• Notifications—controls message notification during calls:
• Receive All—notifies you of all types of messages during calls.
• Msg Mail Only—notifies you of mail messages only; all other types of
message notifications are delayed until the call has ended.
• Delay All—delays notification of all messages until the call has ended.
• Call Waiting—enables you to turn off call waiting for the next call. After
you end the call, call waiting is turned back on.
Security
Security allows you to set security features:
• Phone Lock—sets an optional code that locks your phone.
To Next Page