39
About Phonebook Entries
About Phonebook Entries
Each Phonebook entry may contain the following information:
• The name associated with the entry–Typically, this is the name of the
person whose number you are storing in the Phonebook.
• The type of number to be stored–Mobile, Private, Work, Main, Home,
Pager, IP, Fax, Other, or Talkgroup. If you don’t choose a type, the number is
assigned type Mobile, unless a Mobile number has already been assigned to
the name.
• The number to be stored–Every Phonebook entry must contain a number.
This number may be any type of phone number, Private ID or Talkgroup
number, or an IP address.
• A Speed Dial number–You may accept the default Speed Dial number or
assign a different one.
• A Voice Name–Audio recording for voice-activated dialing.
Viewing Phonebook Entries
Names with more than one number assigned to them appear with
surrounding the icon to the right of the name. For example, if you had stored a
home and work number for Joe Smith, the entry for Joe Smith’s home phone
number would look like this:
Joe Smith ef
1
From the Phonebook screen, press S to scroll to the name associated
with the number you want to see.
2
Press T to view the icons representing the numbers assigned to that
name.
3
When the icon representing the number you want to view is displayed,
press C under VIEW.
Or,
If there is a Private ID or a Talkgroup number stored for the entry, press
q. Then press R to scroll to View and press C under SELECT.
4
Press S to view the other numbers stored for this name.
To Next Page
Loading...