Nexxt Solutions Bolt AX1800 - Introduction; Product Description

Table of content
Introduction
I. Product description
• Front view
• Back view
• Bottom view
II. How to install the Nexxt Home app
III. Router installation
IV. How to add the Bolt AX1800 to your Nexxt Home account
V. How to manage the application
1. Status
2. Devices
3. Settings
A. Wi-Fi setting
B. Guest Wi-Fi
C. Parental control
D. Wi-Fi Mesh
E. LED indicator
F. Maintenance schedule
G. Firmware upgrade
H. WPS
G. QoS
I. Fast roaming
J. Port forwarding
K. UPnP
L. DHCP
M. DNS
O. Message notications
VI. How to add an additional node
VII. How to manage your node through a desktop internet site
VIII. Troubleshooting
Introduction
Hello! Congratulations on your purchase of the Nexxt Home Bolt
AX1800. To ensure optimal operation of this unit, carefully read the
manual in your hands. And if you have questions about its
installation and operation, do not hesitate to contact us. A technical
support agent will help you with whatever you need. In the following
link you will nd several ways to communicate with us:
https://www.nexxtsolutions.com/connectivity/support/contact-us/
I. Product description
• Front view
The LED indicator on the front of the Bolt AX1800 gives you
real-time information about its activity and status. Here's how to
read its prompts:
English
LED indicator Status
Solid
O
Blinking
Solid
Blue
Red
The system is working correctly.
There is no power to the router or the unit
is unplugged.
The device is in pairing mode with a Wi-Fi
internet signal.
Node disconnected. Check the connection.
If the node is part of a mesh, do a manual reboot,
disconnecting it and connecting it again to
reestablish the mesh.
Description