• Back view
The rear panel allows physical connection to power and client
network devices. Below, we describe each of the ports:
1. WAN Port: This RJ45 port is for connecting the cable
modem or Ethernet line belonging to your internet service provider.
2 / 3. LAN ports: Connect your computer to either of these two
RJ45 ethernet ports.
4. Power Input: Connect the power adapter included with
this product here.
• Bottom view
In addition to the technical information of the product, the lower side
has the reset button. With the node powered on, press
this button for 8 to 10 seconds to return the router to its factory
settings. Use the small key included in the packaging to press
this button.
English
1
1
2 3 4
To Next Page
Loading...
Need help?
General
