V. Managing the app
Step 4
In the “Start Connection” window, the “DHCP” option will appear
selected. Click on the Start connection button. Then, wait a few
seconds until a screen appears with the message “A device was added
successfully.” Click on Done.
If the device was not added successfully, make sure your mobile
device is connected to the correct Bolt AX1800 Wi-Fi network,
"AX1800_XXXX".
1. Status
The Bolt AX1800 interface has a menu with three options: Status, Device
and Settings. Whenever you open the node app, by default you will see the
“Status” option.
This option shows you the signal status in the blue circle in the center. The
blue color means there is an internet connection. Red indicates signal
problems or interference.
Also, within the blue circle you will see the number of devices connected
to your network.
To Next Page
Loading...
Need help?
General
