Setting a value
SHULRGLF LQFUHDVH
DFWLYDWHG
SHULRG GD\V
1H[W LQFUHDVH
$GMXVWDEOH YDOXH
To set a value:
Mark the value you want to set using the up or down button.1.
Press the OK button. The background of the value becomes
green, which means that you have accessed the setting mode.
2.
Press the up button to increase the value or the down button
to reduce the value.
3.
Press the OK button to confirm the value you have set. To
undo and return to the original value, press the back button.
4.
15NIBE™ F110Chapter 2 | The heating installation – the heart of the house
To Next Page
Loading...
