Nibe F1155 - Page 40

cooling settings (accessory required)
cooling1.9.5
set pt value cool/heat sensor
heat at room under temp.
cool at room over temp.
heat/cool sen.
°C
°C
°C
Menu
1.9.5
heat/cool sen.
Factory setting: no sensor selected
set pt value cool/heat sensor
Setting range: 5 - 40 °C
Default value: 21
heat at room under temp.
Setting range: 0.5 - 10.0 °C
Default value: 1.0
cool at room over temp.
Setting range: 0.5 - 10.0 °C
Default value: 3.0
NIBE™ F1155Chapter 3 | F1155 – at your service40