degree minute setting
FXUUHQW YDOXH
VWDUW FRPSUHVVRU
VWDUW DGGLWLRQ
GLII EHWZHHQ DGGLWLRQDO VWHSV
'0
'0
'0
'0
GHJUHH PLQXWH VHWWLQJ
current value
Setting range: -3000 – 3000
start compressor
Setting range: -1000 – -30
Default value: -60
start addition
Setting range: -2000 – -30
Default value: -400
diff. between additional steps
Setting range: 0 – 1000
Default value: 100
Menu
4.9.3
Degree minutes are a measurement of the current heating requirement in
the house and determine when the compressor respectively additional heat
will start/stop.
Caution
Higher value on "start compressor" gives more compressor starts, which in-
creases wear in the compressor. Too low value can give uneven indoor
temperatures.
NIBE™ F1226Chapter 3 | F1226 – at your service50
To Next Page
