Connections
POWER CONNECTION
Incoming supply cable (W1) is enclosed and connected to
terminal block X1 at the factory. Outside the heat pump there
is approx. 1.8 m of cable available.
List of components
Cable grommet, cascade connectionUB1
Cable grommet, communicationUB2
Cable gland, heating cable (EB14)UB3
Cable, incoming supplyW1
Heating medium connection, supply (from F2050)XL1
Heating medium connection, return (to F2050)XL2
Incoming supply
Power connection
W1
XL2
UB1
UB2
W1
XL1
UB3
Communication cable (provided by installer) must be routed
through cable grommet, communication (UB2), connected
to terminal block AA23-X4 and secured with two cable ties.
For connection of accessory KVR 10, heating cable (EB14)
is connected via cable grommet UB3, see External heating
cable KVR 10 (Accessory) on page 28.
NIBE F2050Chapter |26
To Next Page
Loading...
