Nibe F730 - Page 34

If necessary, the different return times can be changed in menu 1.9.6.
The fan speed is shown in brackets (in percent) after each speed alternative.
TIP
If longer time changes are required use the holiday function or
scheduling.
Caution
The heat pump requires a minimum ventilation flow in order to work
properly. An insufficient ventilation flow can result in an alarm and
blocking of compressor operation.
SCHEDULING
scheduling 1.3
ventilation off
heating off
In the menu scheduling indoor climate
(heating/ventilation) is scheduled for each
weekday.
You can also schedule a longer period
during a selected period (vacation) in menu
4.7.
Menu
1.3
HEATING
Increases or decreases in the accommodation temperature can be scheduled
here for up to three time periods per day. If a room sensor is installed and activ-
ated the desired room temperature (°C) is set during the time period. Without
Menu
1.3.1
an activated room sensor the desired change is set (of setting in menu 1.1). One
step is usually enough to change the room temperature by one degree, but in
some cases several steps may be required.
NIBE F730Chapter 3 | F730 – at your service34